1. 2001 Chevrolet Impala LS. 143,xxx Miles, 3800 Series 3.8 Liter V-6 Gasoline Engine, Automatic Transmission, Leather Interior, Power Windows, Power Locks, Power Drivers Seat, Dual Zone Climate Control, Heated Front Seats, ABS, Dual Front Airbags, Driver's Side Seat Mounted Airbag, AM/FM/CD/Cassete, Remote Keyless Entry, VIN: 2G1WH55K319266851
2. TDA Buddy Ergonimic Manipulator. 750 lb. Rated Capacity, Approx 8' Reach, 5HP 440 Volt 3-Phase Motor and Controls, s/n: 1528.
3. Tru-Stone Granite Surface Plate. 36"x48"x6 1/2", Lip, Metal Stand, Approx 36 1/2" Surface Height When Assembled
3.1. Hoff Online Auctions will charge a 15% Buyer's Premium on all items at this sale. Click on this lot for more information.
3.2. UPS Shipping Available for small items Click here for more information.
3.3. This auction features EXTENDED BIDDING! View this lot to learn more.
3.4. How much time is left?
3.5. This auction STARTS TO CLOSE at 10:00 AM CDT at a rate of 2 lot per minute. Click this lot to learn more.
3.6. Click on this lot to learn more about preview dates and times.
3.7. Click on This Lot For Important Removal Information
3.8. Please click on this lot for Rigging Information.
3.9. Items in this sale are in multiple locations. Please see the lot descriptions for locations. If no location is listed, the item is in Minneapolis, MN
4. Cowns Sheet Lifter. 2 1/2" Thickness Capacity, 8-Ton Weight Capacity, s/n: na.
5. Cuttler Hammer Dry Type 3-Phase Transformer. 45KVA, 240 Volt Primary, 208/120 Volt Secondary, 303 lbs, s/n: J98F1566. Approx 25"x14 1/2"x30 3/8"
6. Handy Hoister Moel CHW Die Lift Cart. Mechanical Type, 500 lb. Capacity, 24"x24" Platen, 56" Max Platen Height, s/n: 17434
7. Hardinge T-Slotted Late Bed with Cabinet Base and Motor. Approx 53"x24"x48"
8. Simplex Model 24A Railroad Jack with 2"/23 1/2" to 14"/36" Lift Height, and Overall 21"x8"x23 1/2"
9. Torit Mist Collector. Specs and photos coming soon
10. Barber Coleman Model 6-10 Universal Hobbing Machine. 5" maximum Work Diameter, 10-1/2" Hob Slide, 15-3/4" Spindle Face To Tail Center, 2-1/16" Maiximum Hob Diameter, 60 Degree R to 90 Degree L Maximum Swivel Angle, 3/4" Spindle Shank, 2-HP, 1,200 RPM, 3-Phase, 220 Volt, s/n: 3872, Approximately 59" x 32" x 60" Overall And 2,000 Lbs
11. Merrill-Chinbro Model C8 Pipe Grab. 1400 lb. Capacity, 9.05" O.D. Capacity
12. DataMike Model 700 Laser Micrometer. .0001" Resolution, 8"x6" Measuring Area, Serial & Parallel Output Ports, Manual, 110 Volt, s/n: 5-894.
13. Starrett No. 224 9-12" Interchangeable Anvil Outside Micrometer. Complete with Anvils, Standards and Wooden Case
14. Mitutoyo 1-2" Thread Micrometer with Plastic Case
15. Atlas Copco Model SF 4 FF Air Compressor. Rotary Screw Type, 14.2 CFM Rated Output, Sound Enclosure, 5HP 230/460 Volt 3-Phase Motor, s/n: 50100798. Approx 23 1/4"x23 3/4"x33 3/4"
16. M1 Set of Gage Pins in Metal Case. .061" to .250
17. Mitutoyo No. 516-935 Grade 3 Gage Block Set with Wooden Case. .0625" to 2", s/n: 984627
18. Barber Colman Model 6-16 Gear Hobbing Machine, 6" Maximum Hob Diameter, 16 1/2" Maximum Hob Slide Travel, 21 3/4" Max Distance from Work Spindle to Tail Center, 2 1/16" Max Hob Diameter, Shank Type Hob Spindle, 133 RPM to 533 RPM Hob Speed, 1 1/32" Work Spindle Bore, 3-Phase, 440 Volt, s/n: 5070.
Rebuild partially complete.
 
19. Budafdy&Mfg. Model 2B2 Railroad Jack with 2"21.5" to 11"/31.25" Lift Height, and Overall 21"x7"x21 1/2"'
20. Cleveland Model 1886-606-009 Gear Hobbing Machine. 8" Max Gear Diameter with 3" Diameter Hob, 4 Max Diametral Pitch, 4" Max Hob Diameter, 1 1/2" to 5 1/2" Center Distance from Hob Centerline to Work Spindle Centerline, 5HP 240 Volt 3-Phase Motor and Controls, s/n: 3418-69-8188. Approx 73"x80"x100" and 12,100 lbs
21. Coleman Powermate Model PM0543000.01 Portable Gas Powered Generator Features; 3750 Max. Wattage, AC 120V, 25A, Briggs&Stratton 6.0HP 4-Stroke Motor, 14" Cushion Tires, and Measures 23 1/2"x26"x43"
22. Covel Horizontal Spindle Surface Grinder. Hydraulic Machine, 6"x18" Rated Capacity, 3/4"x12" Wheel Capacity, 6"x18" Permanent Magnetic Chuck, Acu-Rite 2-Axis DRO, Coolant Tank and Pump, 240 Volt 3-Phase Motor and Controls, s/n: 17H-5464. Approx 2,000 lbs.
Location: Philips, WI
 
23. Akro-Mils Metal Double Sided Component Cart with 11-Adjustable Racks and Measures 38"x20"x59"
24. Darex Electric Bench Top Drill Sharpener Features; Double Ended Grinder, Light, 1/3HP, 115V, 3450RPM, Single Phase Electric Motor, and Measures 13 1/2"x15"x12"
Note: Drill holders not included.
 
25. Starrett NO. 252 24" Height Transfer Gage.
26. Sheet Lifter. Approx 2 1/4" Capacity, Unknown Weight Capacity
27. Cadillac Model 10074 "Pla-Chek" 12" Height Gage, s/n: 105696
28. 23-Drawer Plastic Organizer with Contents of Assorted Gage Pins
29. Pratt & Whitney Lapping Plate with Wooden Case. 5" Diameter
30. Barber Coleman Model 6-10 Universal Hobbing Machine. 5" maximum Work Diameter, 10-1/2" Hob Slide, 15-3/4" Spindle Face To Tail Center, 2-1/16" Maiximum Hob Diameter, 60 Degree R to 90 Degree L Maximum Swivel Angle, 3/4" Spindle Shank, Bijur Lubrication, 2-HP, 1,200 RPM, 3-Phase, 220 Volt, s/n: 4101, Approximately 59" x 32" x 60" Overall And 2,000 Lbs.
Location: Isle, MN
 
31. Mitutoyo No. 516-935-26 Grade 1 Gage Block Set with Wooden Case. .0625" to 2"
32. (3) Brown & Sharpe "Holematic" Bore Gages. 3/4" to 4" Range, (1) With Plastic Case
33. Mitutoyo 0-1" Thread Micrometer. .001" Resolution, Plastic Case
34. Mitutoyo No. 126-138 1-2" Thread Micrometer with Standard and, Plastic Case
35. Hevi-Duty 3-Phase Transformer. 30KVA, 480 Volt High, 240/120 Volt Low, 243 lbs, Approx 25"x16"x28"
36. Severn Engineering Permeability Indicator with Wooden Case
37. Metal Foreman's Desk. 34 1/2"x30"x53 1/2"
38. (2) Assorted Hurco Machinery Electronics to Include; (1) Diagram No. 001-1401-001, 115V, Single Phase Electric Panel 12 1/2"x22"x12", and (1) Autobend5 DRO 15 1/8"x13 1/2"x7" with Assorted Harness
39. Aerospace 0-18" Digital Height Gage. .001" Resolution
40. Fellows Model FS180 CNC Hydrostroke High Speed Gear Shaper. 7" Max External Gear Diameter, 7" Max Internal Pitch Diameter, 6.3 DP (Module 4) Max Diametral Pitch, 1.25" Max Face Width, 95 to 1700 SPM In 1-Stroke Increments, 1.5" Max Stroke Length, 45 Degree Max Helix Angle, 6.3" Max Distance from Cutter Spindle Centerline to Table Centerline, 6" Max Cutter Diameter, 4.331" Spindle Bore, 13.15" Max Swing Inside Casting, .0005" Crowning Cam, Holders, Manuals, 440 Volt 3-Phase Motor and Controls, s/n: 36700. Approx 77"x115"x76" and 9,000 lbs.
Note: Transformer not included.
 
41. (9) Quality Measurement Systems Model QA2500 Data Collection Devices with Power Cords, Data Cables, Printers and Documentation. (6) Units Labeled "Good"
42. (2) Stands with 14"x7/8" Columns and (1) 18" Vernier Height Gage
43. Sheet Lifter. 1/2" Capacity, Unknown Weight Capacity
44. (3) Mahr Quick Check Gages: (1) 50-100mm Marked "Needs Repair" (1) 0-40mm and (1) 0-25mm
45. Mutschuler Model 50DA Gear Deburring Machine. Approx 40"x32"x51"
46. (2) Centers: (1) Live with Custom Tip on Tapered Shank and (1) Dead with Flat Nose on #2 MT
47. Paint Pressure Tank Approximately 11" Dia.x10" Reservoir with Replacement Tank Seals.
48. Dayton Model 4Z790 Hydraulic Power Unit Features; 15"x18"x14" Tank, Dayton 6K674F 115/230v 1HP Electric Motor, and Overall 15"x18"x29"
49. Mist Collector. Specs and photos coming soon
50. Barber Coleman Model 16-16 Universal Hobbing Machine, 5" Maximum Hob Diameter, 16" Maximum Work Swing, 16" Maximum Hob Slide Travel, 8" Maximum Work Slide Travel, (9) Speeds From 59-246 RPM, 3-1/8" Diameter Straight Hole Spindle, 3-Phase, 440 Volt, s/n: 3106, Approximately 90" x 43" x 80" Overall and 6,500 Lbs.
Location: Isle, MN
 
51. Caterpillar Model NPP40 Electric Pallet Jack. Approx 4,000 lb. Capacity, 4' Forks, 12 1/4" Between Forks, 24-Volt System, s/n: 2CL03814. Note: Battery needs replacement.
52. Assorted Machine Tool Holders Consisting of; Arbors, Extensions, Approximately (20) Assorted Modified 215 Collets From 5/64" to 1 27/64"
53. Ge Model 5KH39QN9397C 1/3HP 115 Volt Motor with Zeromax Gear Reducer Model S6. 7.5:1 Ratio.
54. Akro-Mils Metal Double Sided Component Cart with 7-Adjustable Racks and Measures 38"x20"x59"
55. (4) Portable Refractometers with Plastic Cases
56. (3) Thread Gages: (1) 5 1/2-10 Inside Type; (1) 3 1/4-12 Inside Type and (1) 3 1/4-12 Outside Type
57. Assorted Plug and Ring Gages up to 4 3/8"
58. Assorted Shop Supplies to Include; Belts, Circular Saw, Filters, Bearings, and More�
59. (2) New Mitutoyo No. 2961F Rear Plunger Dial Indicators. .0005" Resolution
60. Barber Coleman Model 6-10 Universal Hobbing Machine. 5" maximum Work Diameter, 10-1/2" Hob Slide, 15-3/4" Spindle Face To Tail Center, 2-1/16" Maiximum Hob Diameter, 60 Degree R to 90 Degree L Maximum Swivel Angle, 3/4" Spindle Shank, Bijur Lubrication, 2-HP, 1,200 RPM, 3-Phase, 220 Volt, s/n: 4111, Approximately 59" x 32" x 60" Overall And 2,000 Lbs.
Location: Isle, MN
 
61. Starrett Inside Micrometer. 2" to 12" Range, With Padded Case
62. (2) 12" Calipers: (1) Brown & Sharpe Vernier with Wooden Case and (1) Aerospace Dial Type with Plastic Case
63. Assorted Gage Blocks Making up a Set from .1001" to 4" Includes Mitutoyo, SPI and Other Brands in Plastic Case.
64. Fowler 0-24" Height Gage. Dial Read-Out, .001" Resolution
65. Cleveland Model 608-001-1888 Gear Hobber. 8" Max Gear Diameter with 3" Diameter Hob, 4 Max Diametral Pitch, 4" Max Hob Diameter, 1 1/2" to 5 1/2" Center Distance from Hob Centerline to Work Spindle Centerline, 5HP 240 Volt 3-Phase Motor and Controls s/n: 3402-68-8172. Approx 73"x80"x100" and 12,100 lbs.
66. Sheet Lifter. Approx 1 1/2" Capacity, Unknown Weight Capacity
67. Assorted Electric Motors & Parts Consisting of; 1/2-ton Capacity Chain Hoist Parts, and Motors up to 5HP
68. (4) Federal Digital Indicators. 1/8" Travel, .0005" Resolution. 
69. Illanois Toolworks Model 2303-5 Gear Rolling Machine. 3 1/2" Max Gear Diameter, 10" Max Between Centers, 110 Volt, s/n: 4891. Approx 26"x28"x41"
70. Mazak Model QT-8SP CNC Lathe. 4.92" X-Travel, 11.4" Z-Travel, 8-Position Drum Type Turret, 50-5,000 RPM, 1.96" Spindle Bore, 150-5,000 Subspindle Speed, 6.3" / 1.57" Maximum Cut Diameter Chuck/Bar, Kitigawa B-206 3-Jaw Chuck, Coolant Tank and Pump, Jorgenson Chip Conveyor, Mazatrol Cam T-2 CNC Control, s/n:: J-89144-1, Approximately 103" x 58" x 69" and 6,200 Lbs.
Location: Isle, MN

Video Available. Click on lot to view.
 
71. Weightronix Model 3825 Digital Scale. 100 lb. Capacity, .02lb Resolution, 13 1/2"x12" Platform, 110 Volt, s/n: SR04922994. Note: Powers on but nees repair.
72. (7) Assorted Heavy Duty Electric Motors Consisting of; Assorted Schaeff DC Electric Motors and More
73. (2) Fixtures: (1) Approx 22"x17"x9 3/4" and (1) 20" O.D. 9 1/8" I.D. and 4 1/2" at Thickest Point
74. Dozens of 36" Metal Shelf Suppports. 38" Overall Length
75. Cincinnati Milacron Model 220-8 Centerless Grinder. 3" Capacity, 24"x8"x12" Grinding Wheel, 12"x8"x5" Regulating Wheel, Thru-Feed Rest, Plunge, Dressers, 20HP 230-Volt 3-Phase Motor and Controls, s/n: 3503683-001. Approx 142"x63"x85" and 12,000 lbs.
76. Assorted Electric Motors & Parts Consisting of; Electric Motors up to 3/4HP
77. Assorted Electric Motors and Parts Consisting of; Gear Reducers, Electric Motors up to 2HP, Pumps and More�
78. (2) Assorted Paint Application Hand Tools to Include; (1) Walk Behind Spray Paint Striper, and (1) Paint Pressure Tank Approximately 10" Dia.x12" Reservoir.
79. (4) Asorted Scale Lupes: (1) SPI 15x; (2) SPI 7x and (1) Unknown, Appears to be 7x; And Olympus Microscope Slide Prep Kit (Incomplete)
80. Okuma Model LR10 Slant Bed CNC Lathe. 4-Axis Machine, 17.32" Swing Over Bed, 6.69" Max Turning Diameter, 17.72" Distance Between Centers, 2.09" Spindle Bore, Variable Spindle Speeds: 15 to 6,000 RPM, (2) 8-Position Turrets, Chip Conveyor, 10HP 220/440 Volt 3-Phase Spindle Motor, s/n: 02615-0199. Approx 75"x125"x108" and 10,000 lbs. Note: Control Incomplete.
Location: New Folden, MN
 
81. Draper 24" Vernier Height Gage
82. (2) Federal Digital Bore Gages: (1) With 2.0472" Ring Gage and (1) With 2.4409" Ring Gage
83. Change Gears for Cleveland Hobbers. Specs and photos coming soon.
84. Like NEW Honda Model EX350 Gas Powered 2-Stroke Portable AC/DC Generator Features; 150/300VA Output Selector, DC 12V 6A, AC 120V 60Hz, Jump Cables, Instructions, and Measures 6"x14"x12 1/2"
85. NEW Lighting Charger Model LC-12V Gas Powered 2-Stroke Portable DC Generator Features; 55A Charge, 80Amp Starting, 115V DC Outputs @ 900Watts, Tecumseh II 24:1 Motor with Idle Control, Jump Cables, Instructions, and Measures 11"x11"x10" 
86. Assorted Fixtures and Steel Wedges
87. (50) Assorted Plasma Cutting Supplies to Include Mostly New Harris Copper Tips and More As Shown.
88. Plantronics Model M12-Vista Universal Headset Amplifier.
89. Scherr Tumico 7-8" Outside Micrometer with Wooden Case
90. Barber Coleman Model 6-10 Universal Hobbing Machine. 5" maximum Work Diameter, 10-1/2" Hob Slide, 15-3/4" Spindle Face To Tail Center, 2-1/16" Maiximum Hob Diameter, 60 Degree R to 90 Degree L Maximum Swivel Angle, 3/4" Spindle Shank, 2-HP, 1,200 RPM, 3-Phase, 440 Volt, s/n: B071, Approximately 53" x 30" x 66" Overall And 2,000 Lbs.
91. Amano Model TCX -11 Electric Time Punch Clock with Power Source, Keys, and Measures 7"x7"x8 1/2"
92. Assorted Inspection Items Including: MHC 1" Dial Indicator .001"; Gauss Gage; Federal D21 Indicator, .0001", Needs Repair; 0-1" Micrometer in Plastic Case; Starrett Gear Tooth Vernier Micrometer and More
93. (2) Cylindrical Gages With Wooden Cases: (1) 4.5" O.D. and (1) 3.5433 O.D.
94. Assorted Inspection Items Needing Repair and Assorted Cases
95. Electro-Magic Model 1600 Steam Cleaner. Kerosene Fired, Electric Pump, Wand, On Wheels, 110 Volt, Approx 65"x23"x45"
96. Ricoh Aficio 400 Photocopier. 11"x17" Max Doc Size, 1,027,865 Indicated Copies Made, Document Feeder, (2) Paper Feed Trays, Cabinet Base, 110 Volt s/n: na. Approx 44"x27"x45"
97. (2) Custom Fixtures with 26"x18"x1" Steel Base Plates
98. (5) 60" Tall Cubicle Panels Includes (3) 36", (1) 50" and (1) 60"
99. Change Gears for Cleveland Hobbers. Specs and photos coming soon.
100. SMW Space Saver 2000 Bar Feeder. 5' 6" Max Bar Length, 1/4" to 3 1/8" Round Bar Capacity, 3/8" to 2 1/2" Hex Bar Capacity, 3/8" to 2" Square Bar Capacity, (68) 1/2" Bar Capacity, (6) 3 1/8" Bar Capacity, Pendant Control, s/n: 7.8-597. Approx 104"x64"x58" and 1200 lbs.
Location: New Folden, MN
 
101. BTEK Model 7600B Electric Digital Scale with 50Lbs. Capacity, 14 3/8"x12 3/8" Platform, Overall 14 3/8"x12 3/8"x4 1/4" and Includes Heavy Duty Metal Platform 48"x48"x9" 
102. Assortment of Heavy Duty Electrical Plugs and Connectors.
103. Xerox Model 2510 Copier Measuring 55"x18"x15" 
104. Metal Single Pedestal 24" Shop Fan
105. Custom Centering & Facing Machine. 3 3/4" Spindle Height, 19" Between Spindle Faces, 3HP 230/460 Volt Motors, Approx 100"x36"x70" and 2,000 lbs.
106. Ex-Cell-O Model D-D-1212A Centering Machine. Manual Type, 12" Max Workpiece Length, 3" Max Swing Over Bed, 7 1/2HP Motor and Controls, s/n: 2407. Approx 80"x31"x62"
Location: New Folden, MN
 
107. 1979 Ford F-350 1-Ton Stake Bed Truck. 86,xxx Indicated Miles, 351-C Gasoline Engine, C-690 Automatic Transmission, Dual Rear Wheels, Heavy Duty Spring Package, 106"x82 1/4"x30" Inside Stake Panels, VIN: F37HCDH3815