1. Supermill Model J Vertical Milling Machine, 10" x 43-1/4" T-Slotted Table, 23-1/2" Longitudinal Table Travel, 15" Cross Table Travel, 13" Vertical Knee Adjustment, 8-Belted Speeds: 84 to 2,760 RPM, 30-Taper Spindle with Collet Tool Holder, Longitudinal Power Feed, 2.2 KW, Three Phase Motor and Controls, s/n 15468401, Approx: 69" x 73" x 87" and 3,000 Lbs
Fork Lift for Hire has quoted $125 for a basic lift and load of this machine. Please contact Dan with any questions about this quote at 612-803-4350.
 
2. Cummins Model DP-16FHD Single Spindle Drill Press, 6-3/4" Throat, 11-1/2" Diameter Tilting Table, 16-Belted Speeds: 162 to 3,500 RPM, No. 2 Morse Taper Shank, WUE JT3-16mm Drill Chuck, Table Elevation Mechanism, 3/4HP, Single Phase, Motor and Controls, s/n 962241, Overall 11"x22"x62" Approximately 85Lbs.
3. (9) Assorted Carbide Endmills From 4"L x 3/4" Diameter To 6"L x 3/4" Diameter.
4. Hundreds of Assorted HSS Endmills, Drills and Taps. Endmills up to 1/2" Diameter, Drills up to 1" Diameter and Taps up to 3/4" Diameter.
5. DoAll Model C80 Horizontal Band Saw, 12" x 16" Rated Capacity, 12-3/4" Capacity in Rounds, Variable Blade Speeds: 0 to 400 FPM, 1" x 144" Blade Size, 1" to 24" Adjustable Index Stroke, Hydraulic Vise, Automatic Bar Feed, Coolant, 42" Cut Off Table, 5 HP, Three Phase Motor and Controls, s/n 190-76839, Approx: 77" x 106" x 60" (Not Including the Cut Off Table) and 5,000 Lbs
Fork Lift for Hire has quoted $150 for a basic lift and load of this machine. Please contact Dan with any questions about this quote at 612-803-4350.
 
6. (3) Boxes of 12" Diameter Abrasive Discs with 2" Diameter Center Hole.
7. (8) Partial and Complete Sets of Soft Jaws.
8. (20) Assorted 5C Collets Up To 1-1/16" With Collet Caddy.
9. (6) Assorted Band Saw Blades Including: (1) Sandflex Dragon, 12' l x 1" width, .035" thickness and 4/6 Teeth. (1) Sandflex Dragon 12'L x 1" width, .035 Thickness and 6/10 Teeth, (1) Starrett 12' L x 1" width, .035 Thickness and 4/6 Teeth, (2) 1" Width and (1) 3/4" width.
10. Quincy Model QE-10 Recipricating Type Air Compressor, 10 HP, Approx 44 CFM, 80-Gallon Horizontal Receiver Tank, Pressure Gauge, Mounted in Steel Frame, Three Phase Motor and Controls, s/n DI1463, Approx: 84" x 35" x 92" and 1,500 Lbs
Fork Lift for Hire has quoted $75 for a basic lift and load of this machine. Please contact Dan with any questions about this quote at 612-803-4350.
 
11. Collet Closer.
12. HDC Model MJ-16F Single Spindle Drill Press, 6-3/4" Throat, 12"x12" Table, 16-Belted Speeds: 220 to 4,000 RPM, 16mm Capacity Drill Chuck, Table Elevation Mechanism, 3/4 HP, Single Phase, Motor and Controls, Overall 13"x24"x62" Approximately 85Lbs
13. (25) Assorted Carbide Endmills from 3"L x 3/8" Diameter to 3"L x 1/2" Diameter.
14. Approximately (70) HSS End Mills and Spotting Drills up to 1-5/16".
15. Nakamura-Tome Model Slant-4 CNC Combination Turning Center, 33.86" Maximum Swing Over Bed, 20.47" Maximum Swing Over Saddle, 18.31" Maximum Turning Diameter, 21.65" Maximum Turning Length, 12.20" X-Travel, 23.23" Z-Travel, 9 to 3,000 RPM, Approx 3.15" Hole Thru Spindle, 10-Position Turret, Programmable Tailstock, Fanuc 6TB CNC Controls, 12" 3-Jaw Chuck, Chip Conveyor, Coolant, 22 KW, Three Phase Motor and Controls, s/n C40301, Approx: 164" x 73" x 104" and 14,000 Lbs
Dynamic Rigging has quoted $650 for a basic lift and load of this machine. Please contact Tracy with any questions about this quote at 612-210-2499.
 
16. Auto Blok Type 315GH 12" Threaded Type 3-Jaw Chuck.
17. Assorted Tooling Including: Threading Tools, Live and Dead Centers and More as Shown.
18. (3) Boxes of 12" Diameter Abrasive Discs with 2" Diameter Center Hole.
19. Square D Cat.# 45T3H Three Phase insulated Transformer, 45 KVA, HV: 480, LV:208Y/120, Overall 20-1/4" x 20" x 30" and 330 Lbs
20. Sundstrand Centering Machine, Double End Type, 4" x 20" Capacity, 4" Diameter Maximum Capacity, 20" Maximum Work Length, Hand Lever Feed, Double Acting Vise, 1 HP, Three Phase Motor and Controls, s/n 53-213, Approx: 66" x 32" x 52" and 1,500 Lbs
Fork Lift for Hire has quoted $40 for a basic lift and load of this machine. Please contact Dan with any questions about this quote at 612-803-4350.
 
21. (11) Assorted collets.
22. Big Joe Model 9957S Electric Walk Behind Fork Lift, 1,000 Lb Rated Capacity, 3" x 30" Forks, 52" Vertical Lift, Built In Battery Charger, No Battery, s/n 46168, Approx: 28" x 50" x 68"
23. Enco Model 126-2170 Drill Press Feature; 8 1/2" Throat, 16-Belted Speeds From 215 to 3,250 RPM, No. 2 Morse Taper Spindle, 5" Quill Travel, Single Phase Motor and Controls, s/n 03010, Overall 10"x25"x65" Approximately 80Lbs
24. (24) Assorted Carbide Endmills From 2-7/16"L x 3/16" Diameter to 3"L x 3/8" Diameter.
25. Rong Fu Model MBS-71200M Horizontal Band Saw, 7" x 12" Rated Capacity, 7" Diameter Capacity in Rounds, 4-Blade Speeds: 85, 130, 180, & 235 FPM, 3/4" x 93" Blade Size, Coolant Tank, Gravity Downfeed, 1 HP, Single Phase Motor and Controls, s/n 574254 , and Overall 49" x 16" x 40" 
26. (7) Assorted Insert Type Turning Tools Including: Valenite Model 4T4 .625, Valenite Model GTD-075-.075, Iscar Model TGIR-25 .4C-3 and More As Shown.
27. Type PF70-5C Spin Indexer and (1) 5C Grinding Fixture.
28. Partial 1/2" Hold Down Set with Holder.
29. Sorgel Three Phase Insulated Transformer, 75 KVA, HV: 480, LV: 208Y/120, Class AA, Overall 30-1/2" x 20" x 30" and 504 Lbs
30. Kitako Model "Variant Turn" CNC Combination Turning Center, 24.4" Maximum Swing Over Bed, 31.9" Maximum Between Centers, 10" Maximum Turning Diameter, 25.2" Maximum Turning Length, 8.66" X-Travel, 26.8" Z-Travel, 30 to 3,000 RPM, 3.03" Hole Thru Spindle, 12-Position Turret, Programmable Tailstock, Fanuc 6TB CNC Controls, 12" 3-Jaw Chuck, Chip Conveyor, Coolant, 25 HP, Three Phase Motor and Controls, s/n 40087, Approx: 166" x 84" x 83" and 12,500 Lbs
Dynamic Rigging has quoted $650 for a basic lift and load of this machine. Please contact Tracy with any questions about this quote at 612-210-2499.
 
31. Assorted Soft Jaws Including #'s KT-10200P, KT-12200, KT-10205 And More As Shown.
32. Single Spindle Drill Press Model HJ-1133, 4" Throat, 6-5/8" x 6-1/2" Tilting Table, 5-Belted Speeds: 650 to 2965 RPM, Morse Taper Spindle, 13mm Capacity Drill Chuck, Single Phase Electric Motor, Overall 7 12/"x17"x23" Approximately 45Lbs
33. (8) Assorted Square Shank Insert Type Tool Holders Including: (3) Kennametal Model NER163C WK9, (2) Valenite Model SD-TMR-16-3. (1) Sandvik Model MVVNN163DFIM, (1) Fabmet Model MCLNR163D, (1) Seco Model CER100-5-16QHD and (6) Cemented Type Tools.
34. Assorted Go-NoGo Gauges Up To 1.268".
35. Torit Model TD-3-34 Dust Collector, 5 HP, s/n 1G305067-001, Overall 32"x40"x56" 
36. (4) Assorted Round S16 Collets Including: (3) 1-5/8" Collet with Collet Pads, (1) Greenlee 2" Round Serrated Collet with Collet Pads.
37. Assorted Hardinge S20 Round Serrated Collet Pads.
38. Assorted Hardinge B20 Feed Finger Pads Including: (9) 1/2", (6) 1-1/2", (1) 5/16" and (1) 7/16" Hex Collet Feed Finger.
39. Dozens of Assorted Go-No Go Gauges up to 2.039".
40. DoAll Model C-1216A Horizontal Band Saw, 12" x 16" Rated Capacity, 16" Capacity in Rounds, Variable Blade Speeds: 85 to 450 FPM, 1-1/4" x 162" Blade Size, 0" to 24" Adjustable Index Stroke, Hydraulic Vise, Automatic Bar Feed, Coolant, 5 HP, Three Phase Motor and Controls, s/n 423-84120, Approx: 84" x 108" x 68" and 5,000 Lbs
Fork Lift for Hire has quoted $150 for a basic lift and load of this machine. Please contact Dan with any questions about this quote at 612-803-4350.
 
41. (7) Anderlex 8" Diameter Flap Wheels. 3,200 Max RPM. And (1) 12" Diameter Flap Wheel.
42. (7) Sets of Assorted Soft Jaws.
43. 8-3/4" x 4" Diameter Piece of Steel Stock.
44. (3) Boxes of 12" Diameter Abrasive Discs with 2" Diameter Center Hole.
45. Thompson Model B Horizontal Spindle Surface Grinder, Hydraulic Machine, 12" x 30" Rated Capacity (Approx), 12" Cross Spindle Movement, 36" Longitudinal Table Travel, 12" Vertical Adjustment of Spindle, 12" Maximum Under Wheel, Variable Longitudinal Feeds: 20 to 200 IPM, 12" x 2" Wheel Size, Wheel Dresser, Coolant System, Neutrofier II Chuck Controls, No Chuck, 3 HP, Three Phase Motor and Controls, s/n B83439, Approx: 96" x 68" x 86" and 7,500 Lbs
Fork Lift for Hire has quoted $150 for a basic lift and load of this machine. Please contact Dan with any questions about this quote at 612-803-4350.
 
46. Assorted Machine Tooling Including: 2" Diameter Shank Tool Holders and More as Shown.
47. Bausch and Lomb Cat. No. 38 75.67.05 acu-Rite Digital Position Readout. 2-Axis, Inch or MM, 115 Volt, 50/60 HZ, S/N 1146010 With Mounting Bracket.
48. (6) Position Turret. 5-1/2" Between Mounts.
49. (3) Assorted Drill Indices. ( No Drills Included )
50. (8) Sets of Assorted Soft Jaws.